Toner cartridge printing defects causes and solutions – 1 Leave a comment

Sometimes, when our customers complain something about our laser toner cartridges, it is not that the toner malfunction, but just because the customers did not use it properly. For example, recently one of our customers asked me on WeChat about its Print Rite toner did not print evenly. See the pictures below:
toner_cartridge_printing_defects_causes_and_solutions_1_1 toner_cartridge_printing_defects_causes_and_solutions_1_2Even there is no problem with the quality of toner cartridges, we still constantly encounter some complains ¬†like “printed handwriting is not clear, annoying black lines or black bars, abnormal screech”.
toner_cartridge_printing_defects_causes_and_solutions_1_3Don’t worry, let me share with you about how to solve the most common types of printing problems here.

Firstly, if the prints are not clear in the middle, and the toner is full inside the cartridge, it is very possible that toner is not distributed evenly inside the cartridge, and you should shake it a little bit from right to left. And usually this will solve the problem. So remember to always shake the cartridge before installation for better printing result.

Shake it from right to left to make the toner distributed evenly inside the cartridge; pull out the seal; finally install it into the printer.
Shake it from right to left to make the toner distributed evenly inside the cartridge; pull out the seal; finally install it into the printer.

Secondly, if

Leave a Reply

Your email address will not be published. Required fields are marked *